Skip to end of metadata Go to start of metadata

Physiology and Morphology

 

UNDER CONSTRUCTION BY AARONS - PLEASE DO NOT EDIT

 

Searching the Database

In the current release of the Allen Cell Types Database, we include electrophysiological recordings from 1058 mouse cells and 279 human cells. For a subset of these cells, we also include morphological reconstructions and neuronal models. The Cell Feature Search page allows you to select cells that satisfy certain conditions and to view summary cards for those cells in a desired sorting order. From a cell's summary card, you can then navigate to pages that contain detailed electrophysiological or morphological information for that cell.

The Cell Feature Search page is divided into three areas: 1) In the top area, you can set filters for cell properties that have discrete values; for example, you can choose to select only cells from a certain species and certain cortical layers. You can also use this page to find cells for which specific types of data are available; for example, you can select only cells for which there is not only electrophysiological data, but also morphological reconstructions and neuronal models. 2) In the middle area, you can set conditions on numerical features in certain value ranges by using a parallel coordinate plot. 3) In the bottom area, you can view the summary cards for the cells that were selected with the filters set in the two areas above and you can then choose the sorting order in which those cards are displayed.

Filters

You can set filters for cell properties or data types by checking boxes and selecting one or more items from the drop-down menus at the top of the Cell Feature Search page. (Note: while the Transgenic Targeting and Donor Profile selections apply only to mouse and human cells, respectively, the rest apply to all cells.)

 

 

The following table describes the meaning of the properties available for filtering. For more details, see the Documentation.

 

Parallel Coordinate Plot Of Cell Features

You can use the parallel coordinate plot to select cells with numerical features that satisfy certain conditions. First you choose up to five different fetures from the drop down menus under the axes, and then you select the value ranges of interest by clicking on the axes. For example, the cells selected in the figure below have Upstroke:Downstroke ratios in the range 2.0 to 5.0 and Adaptation indeces in the range -0.4 to 0.4. Each line represents a cell and the intersection with each axis indicates the value of the feature associated with that axis. Cells that do not have feature values in the selected ranges are represented by gray lines.

The "color by" drop-down menu allows you to select a feature whose value determines the line color for the cell. For example, in the figure below the lines are colored according to the Upstroke:Downstroke ratio values, so cells with higher values are represented by purple lines while cells with lower values are represented by blue lines. 

 

 

The following table describes the meaning of the properties available in the drop-down manus.For more details, see the Documentation.

Electrophysiology Results

Filtering of the dataset results in a list of experiments ranked (by default) by Upstroke:Downstroke. You can alter the sort parameters from the Filters menu.

Each experiment lists metadata regarding the classification of the cell, including the Cre-line, the Area, the Layer, Cell Reporter (positive or negative), the Dendrite Type as well as whether or not the Apical Dendrite is intact. It also includes thumbnails showing a trace of the action potential from which many of the electrophysiological features are calculated and (when available) the reconstructed neuron.

The thumbnail depicting the reconstructed neuron includes the dendrites (red), the apical dendrites (orange) and the axon (blue). The portion of the neuron representing each of these morphologies is depicted in a histogram to the right of the reconstructed neuron. The neurons location in the cortex is indicated by the scale showing normalized cortical depth where the top is the pial surface and the bottom is the white matter. NOTE: this scale is not a measure of cortical layer.

If you have selected several cells to compare, you can save this or other kinds of searches by selecting the "Permalink" feature.

Clicking anywhere in a cell's results box will open a new page with the experimental details.

Experimental Detail Page - Electrophysiology

The Experimental Detail page includes the Electrophysiological Summary and a workspace to Browse Electrophysiology Data. The Electrophysiology Summary includes a thumbnail of the location of the cell mapped to the CCF, metadata on the cell including Mouse Line, ID, Area, Cell Reporter, Dendrite Type, Apical Dendrite and Hemisphere. Values from each of the electrophysiology cell features are also listed along with model parameters (where appropriate). You can also view plots of the F/I and V/I curves here.

Clicking on the image of the cell (when available) will open a new page containing the Morphology data.

The electrophysiological data itself can be viewed from this page, or downloaded to be visualized on another platform or in a third party program. The Allen SDK provides a simple Python module to support downloading metadata and NWB files for cells in the Allen Cell Types Database. Please see the Data API Client documentation page to see an example.

1. Select Stimulus type: A drop-down menu from which you can select the stimulus type and see the resulting Cell Response.
2. Select Neuronal Model: When available, neuronal models have been run on the data and when selected will open below the recorded Cell Response.
3. Download Data: This link will download the .nwb file with the data from this experiment. For more information, please see here.
4. Select Sweep: Select sweeps will be available for you to inspect from this view. As you hover your mouse over each colored square, not only do you see the resulting graphs change to reflect the sweep selected, but you also will see sweep metadata (Sweep #, Stimulus amplitide (pA) and # of spikes) listed below the squares. Once you click on a colored square, you can use left/right arrow keys to move between the sweeps.
5. Slider Bar: This feature allows you to zoom in and out of the Stimulus, Cell Response and Model views by clicking and dragging on the arrows.
6. Stimulus: The stimulus injected into the cell.
7. Cell Response: The response of the cell to the injected stimulus.
8. (Optional) Model Response: When available, the model of the cellular response.

Stimulus Types

Different sets of stimulation waveforms were used in order to:

1. Interrogate intrinsic membrane mechanisms that underlie the input/output function of neurons
   1. Linear and non-linear subthreshold properties
   2. Action potential initiation and propagation
   3. Afterhyperpolarization/afterdepolarization
2. Understand aspects of neural response properties in vivo
   1. Stimulation frequency dependence (theta vs. gamma) of spike initiation mechanisms
   2. Ion channel states due to different resting potentials in vivo
3. Construct and test computational models of varying complexity emulating the neural response to stereotyped stimuli
   1. Generalized leaky-integrate-and-fire (GLIF) models
   2. Biophysically and morphologically realistic conductance-based compartmental models

Neuronal Models

The Allen Cell Types Database contains three types of neuronal models: two biophysical models and generalized leaky integrate-and-fire (GLIF) models. These models attempt to mathematically reproduce a cell's recorded response to a current injection. The biophysical models take into account dendritic morphological structure, whereas GLIF models are simple point neuron models that represent the neuron as a single compartment.

There are five levels of GLIF models with increasing levels of complexity. The most basic model is a simple leaky integrate-and-fire equation. More advanced GLIFs attempt to model variable spike threshold, afterspike currents, and threshold adaptation.

More detailed information on each of the models is available in the whitepapers in Documentation.

Morphology

When available: the Morphology page can be reached either by clicking on the image of the reconstructed cell in the search results page,

or by clicking on the image of the cell on the Electrophysiological Detail Page.

Experimental Detail Page - Morphology

The Experimental Detail page includes the morphology summary and a viewer to browse the morphology data. The Morphology Summary includes the location of the cell mapped to the CCF, metadata on the Mouse Line and location of the cell. It also shows the Morphological features most appropriate to the data (see more information in the Morphology whitepaper in Documentation), a thumbnail showing the neuron reconstruction including cortical depth, as well as a thumbnail illustrating the electrophysiology traces.

Clicking on the electrophysiology thumbnail will open a new page containing the Electrophysiology Results data.

Projected views of the biocytin filled neuron were constructed by composing the darkest intensity pixel from each plane of the image stack into a single plane.

Projected top view and side view, as well as the 3-D neuron reconstruction can be viewed from this page.

From the Projected top view, you can zoom into the picture from the on-screen navigation tools, the Keyboard Commands or using your scroll wheel. The two views of the neuron are synched so zooming in on one will also zoom the other. Clicking on "View image stack" will take you to an image viewer to view the individual images taken of this neuron.

The image viewer of the 3-D neuron reconstruction allows for visualization of the reconstructed neuron using the onscreen navigation tools. Clicking "Reset" will reset the neuron to its default view. The legend in the 3D reconstruction indicates the various components of the reconstruction.

You can download both the reconstruction (as an .swc file) or the calculated morphological measurements (as an XML) from the links below the viewers. For more information please see the API Documentation.

Morphology Image Stack

Clicking "View Image Stack" while browsing the Morphology data will take you to our image viewer. The title bar includes the Mouse Line, the Specimen ID, the structure and the hemisphere. The "Configure" icon opens a menu that will allow you to vary the image contrast and download the individual images. The entire image stack can be navigated through using the on screen navigation tools, using the Keyboard Commands or by clicking on the Projected Side View.

Scale Bar

Shows the current viewing resolution of the image, in microns. This value dynamically changes as you zoom in/out of the image. You can position the scale bar anywhere on the main image by dragging the scale bar by its ruler.

You can toggle the orientation of the scale bar from horizontal to vertical by clicking on the scale bar text.

Keyboard Commands